Krell Industries 7.1 manual Component Video Inputs, Comm Port RS-232Connector, 53 RC-5In, stand-by

Back Panel Description, continued

Video Inputs and Outputs,

continued

51 Component Video Inputs

The Home Theater Standard 7.1 is equipped with two sets of compo- nent video inputs.

Note	On-screen display (OSD) is not available for progressive component video.
	OSD is available for interlaced component video.

Back Panel Remote Control Connections

Note

Note

52 Comm Port RS-232 Connector

The Home Theater Standard 7.1 is equipped with an RS-232 com- munication port, which allows you to send operational instructions directly to the Home Theater Standard 7.1 using an external comput- er control system. For more information, see RS-232 Port: Sending Commands and Interpreting Data, the developer’s reference for the Home Theater Standard 7.1.

The Home Theater Standard 7.1 has a PHAST Link option.

53 RC-5 In

The RC-5 input makes custom installation easy and secure by accepting baseband RC-5 input commands from hardwired remote controllers.

54 12 VDC In and Out

The 12 VDC output sends a 12 Volt power on/off signal to other Krell components via a 12 V trigger cable, as well as to other devices that incorporate 12 Volt power on/off trigger input. The Home Theater Standard 7.1 has four programmable 12 Volt outputs: Out1, Out2, Out3, and Out4; and one input.

When the Home Theater Standard 7.1 is in the operational mode and a trig- ger is configured, the 12 VDC Out provides 12 V of DC output. When the Home Theater Standard 7.1 is in the stand-by mode or off, or if a trigger is not configured, the DC output is 0 V.

Power Connections	55 Back Panel Power Switch
	Use this switch to change the Home Theater Standard 7.1 from off to
	stand-by.
	56 IEC Connector
	The Home Theater Standard 7.1 is equipped with a standard female
	IEC power connector, for use with the AC power cord.

16 Krell Home Theater Standard 7.1