Connecting the Home Theater Standard 7.1 to Your System, continued
Step 5: Connect
Video Sources and
the Video Monitor,
continued
Step 6: Activating the On Screen Display (OSD)
Follow these steps to connect the Home Theater Standard 7.1 to the video sources and monitor in your system:
1.Connect the video outputs on each video source in your system to video inputs on the Home Theater Standard 7.1.
2.Connect the video outputs on the Home Theater Standard 7.1 labeled OSD to the inputs of the video monitor.
The on screen display (OSD) needs to be active in order to access the Home Theater Standard 7.1 configuration menu.
1.Power on the Home Theater Standard 7.1 by switching the back panel power switch to on. Wait for the Home Theater Standard 7.1 to initialize. The words PLEASE WAIT, INITIALIZING appear in the front panel display (24), followed by the appearance of the model name, the software version, and the AC line frequency in the dis- play window. After a short period of time, the front panel display becomes blank.
2.Then press the power button (1) on the front panel or the power pre key (58) on the remote control to power on the Home Theater Standard 7.1. The Home Theater Standard 7.1 defaults to the DVD device which is configured with the following factory defaults: video signal=component; format=NTSC Interlaced.
3.Select the video device that matches the video connection from the Home Theater Standard 7.1 to the video monitor. See Figure 4, on page 25, for North American operation or Figure 5, on page 26, for International operation.
4.Press the device selection button on the front of the Home Theater Standard 7.1, or use the remote control key dedicated to the video device. The device selection LED on the front panel of the Home Theater Standard 7.1 illuminates.
5.Press the menu key (82) on the remote control to verify that the OSD appears on the video monitor. The words MENU MODE appear on the front panel display and the configuration menu screen is visible on the video monitor.
If the video signals do not match, and you press the menu key on the remote control, the words MENU MODE appear in the front panel display and a blank screen remains on your video monitor.
28 | Krell Home Theater Standard 7.1 |
