Troubleshooting (continued)
Issue | Solution |
Even though your headset is turned on, | 1.Ensure that your Bluetooth mobile phone is set to Bluetooth mode, |
the call is not automatically connected | and that ezTalker mini (BTHS) has been selected as the connected |
to ezTalker mini when you dial a number | Bluetooth device. (This is important as most Bluetooth phones are |
on your mobile phone. | designed to pair with more than one Bluetooth device.) |
| 2.The problem may persist in some rare cases, as the phone may be too |
| busy to process the call and have difficulty establishing the connection |
| with the headset. If this is the case, make a call from your mobile phone, |
| and then press the TALK button on the headset. The mobile phone |
| should transfer the call to your headset within one second. |
|
|
You hear a crackling noise when | You have exceeded the 30 |
connected on a call through the headset. | Move your mobile phone closer to the headset. |
You hear a clicking noise when | You are experiencing interference on the connection between your mobile |
connected on a call through the headset. | phone and the headset. Try changing locations. |
Limited Warranty
The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period Tekkeon, Inc. will replace the defective product when the owner returns all product contents. The limited warranty will be considered void if the unit is tampered with, subject to misuse, negligence or accidental damage, has been improperly serviced, or if the security seal is removed. This warranty is limited to replacement only and shall not cover any other damages. Any product returned to Tekkeon, Inc. with no fault found will be returned to the owner at the owner’s expense.
To obtain warranty coverage, please complete and submit the enclosed ezTalker mini registration card.
USER GUIDE | 13 |
