Tekkeon ET2000 manual Fitting ezTalker mini On Your Ear, To Place the Headset On Your Ear

Fitting ezTalker mini On Your Ear

ezTalker mini is designed to fit comfortably in your ear. For added comfort, you can change the ezFit Earpiece. For added stability, you can add the ezEarhook.

To Place the Headset On Your Ear

1.Place the ezTalker mini speaker in your ear with the microphone angled toward your mouth. The headset should fit snugly in your ear and remain in your ear when you move your head. However, if the ezEarpiece is too large for your ear, you can replace it with the medium size provided, and/or add the ezEarhook.

To Replace the ezFit Earpiece

1.	To remove the ezFit Earpiece, hold the plastic and gently pull toward you.
2.	Snap the other ezFit Earpiece into place.	Figure 2.

ezTalker mini with

To Add the ezEarhook

ezFit Earpiece

1.Position to hole on the end of the ezEarhook over the stem on the rear of ezTalker and push to snap the ezEarhook into place.

2.If the ezEarhook is positioned for your right ear, swivel the hook counter-clockwise until the hook is to the right of the earpiece and rotate the top portion of the hook to wear on your left ear. If the ezEarhook is positioned for your left ear, swivel the hook clockwise until the hook is to the left of the earpiece and rotate the top portion of the hook to wear on your right ear.

3.Mold the soft plastic on the ezEarhook as needed for a better fit.

Figure 3.

ezEarhook

(positioned for

left ear)

NOTE: One side of the loop is easier to attach than the other side. If you have difficulty inserting the loop, flip the loop.

6