Tekkeon MP110050 Playing iPod Music on an FM Radio/Stereo, User Guide, To disconnect myPower FM

To disconnect myPower FM:

1.Gently pull myPower FM from myPower for iPod.

2.Move the myPower for iPod power switch to Off to turn off the power.

Playing iPod Music on an FM Radio/Stereo

myPower FM will play your iPod music on an FM radio or stereo within 15 feet of the iPod. You must first select the channel on myPower FM, and then select the same channel on your FM radio. The seven pre-set channels available on myPower FM are CH1, CH2, 88.1, 88.3, 88.5, 88.7, and 88.9. CH1 and CH2 are market-dependent channels. The default channels for these two selections are 87.7 (CH1) and 87.9 (CH2). The last channel in the bottom row is not used.

To play iPod music on your FM radio:

1.When myPower FM is first connected to myPower for iPod, the unit will be set to CH1 (87.7), the default FM channel.

2.Place myPower FM near your FM radio (within 15 feet).

3.Turn on your FM radio and select 87.7 on your dial.

4.Turn on the connected iPod and play your music. You will hear the music broadcast on your FM radio or stereo.

FM Channel

Indicators Channel

Selector

5.If the reception on the selected channel is not clear, press the channel selector on the front of myPower FM to select the next

channel. An LED will light to indicate the channel selection. Each time you press the button, the selection will change, moving across the channels on the front of myPower FM

from left to right, top to bottom.

6.Change the FM radio station to the channel set on myPower FM.

7.Repeat steps 5 and 6 until you identify the optimum FM channel in your area.

USER GUIDE 3