![](/images/new-backgrounds/1298612/29861227x1.webp)
View myPower ALL Plus Battery Capacity
The capacity in myPower ALL Plus will decrease as the battery powers and/or charges your devices. The remaining capacity is shown on the voltage indicator, which is accessed as described below. As the remaining capacity decreases, the lights will turn off in sequence from right to left. When the myPower ALL Plus battery capacity is low, only the first capacity indicator will be on. You should recharge myPower ALL Plus at this time. When myPower ALL Plus is completely out of battery, all lights will be off. At this point, you must charge myPower ALL Plus.
1.With the output cable disconnected from myPower ALL Plus and the power switch in either position, press and hold the voltage selector/capacity button to check the capacity.
or
With the output cable connected to myPower ALL Plus and the power switched to OFF, press and hold the voltage selector.
or
With the device connected and the power button switched to ON, press and hold the voltage selector.
2.To view the voltage selection, release the voltage select and the battery capacity indicators will turn off. One indicator will remain on to indicate the voltage selection.
Capacity Indicator
1st Blue Indicator | |
|
|
2nd Blue Indicator | |
|
|
3rd Blue Indicator | |
4th Blue Indicator | |
|
|
5th Blue Indicator | |
|
|
6th Blue Indicator | |
7th Blue Indicator | |
|
|
8th Blue Indicator |
12