Command Descriptions
Option 01 VXI Interface Module User Manual 3–53
If an error condition is detected by the Option 01, it places an error message
describing the condition in the error/event queue. The SYSTem:ERRor? query
requests the Option 01 to remove the oldest message in the error/event queue and
place it into the output queue. If the error/event queue is empty, a “No error”
message is placed in the output queue.
Command Response
 0, “No error”
 –222,“Data out of range; Invalid section number”


N/A
N/A
N/A
ROUTe:OPEN:ALL
Channel 1 of all sections on all VX4320 Modules is closed. All relays on all
modules (except VX4320 Modules) are set to the open position. The PON bit of
the Standard Event Status register is not affected by this command.
Command Response
 no response
 no response


N/A
N/A
Description
Examples
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Description
Examples
Command Syntax
*RST Value
Limits