Designing an Interface Between a P6434 Probe and a SUT
8P6434 Probe Instructions
You can purchase latch housing mechanisms to use with Mictor connectors. The
latch housing surrounds the Mictor connector in your SUT and provides positive
retention of the P6434 probe.
Figure 6 shows the dimensions of the optional latch housings.
31.50 mm
(1.240 in)
12.19 mm
(.480 in)
4.95 mm
(.195 in)
1.27 mm
(.050 in)
28.20 mm
(1.110 in)
25.63 mm
(1.009 in)
7.11 mm
(.280 in)
1.52 mm
(.060 in)
1.40 mm
(.055 in)
5.08 mm
(.200 in)
.51 mm
(.020 in) 2.64 mm
(.104 in)
9.90 mm
(.390 in)
3.63 mm (.143 in)
3.55 mm (.140 in)
1.42 mm (.056 in)
25.40 mm
(1.000 in)
Straddle mount
Figure 6: Latch housing dimensions
NOTE. Refer to the Standard Accessories list in the Replaceable Parts section for
information on ordering surface-mounted or straddle-mounted latch housings.