EDIT Menu
Append 0 | ª0º (7FF) values will be added after the data until a |
| size of a multiple of 8 is reached. |
Expand | The data will be interpolated and expanded to make |
| it a multiple of 8. |
Expand with Clock | The data will be interpolated and expanded to make |
| it a multiple of 8, and the clock speed will increase |
| proportionately. |
Cancel | The operation will be canceled and the editor screen |
| will reappear. |
Leave as it is | The operation will be canceled and the data will be |
| written as is. The file that has been created cannot be |
| output on this instrument. |
Select the appropriate command from the side menu and change the waveform point size.
If the data point count is set longer than the current waveform data, new points with a value of zero are added at the right end of the waveform. On the other hand, if the data point count is set shorter than the current waveform data, points are deleted from the right end.
To set the waveform point value to 512:
1.Select Setting from the bottom menu.
2.Select Waveform Points from the side menu.
3.Use the numeric keys or the general purpose knob to enter a value of 512. In the case of the numeric keys, press 5, 1, 2 and ENTER in that order.
Setting Horizontal Axis Units. Horiz. Unit sets the units for the horizontal axis for the displayed waveform in either time or number of points. The following diagram shows the menu configuration.
Point
Setting More 1 of 2 |
| Horiz. Unit |
|
Time
Each time the Horiz. Unit button in the side menu is pressed, the units toggle between Time and Point. When Time is selected, the Clock item is added to the side menu and the clock frequency can be set.
AWG2021 User Manual | 3 31 |