EDIT Menu
250 MHz, waveform data can be edited at a resolution of 4 ns. Figure 3
Figure 3 !17: Menu Displayed When Clock is Selected
1.Select Setting from the bottom menu.
2.Press the Horiz. Unit button in the side menu to select Time.
3.Select Clock from the side menu.
4.Input the clock frequency with the numeric keys or the general purpose knob.
The default setting for clock frequency is 100 MHz. The clock frequency set in this process will be displayed in the Internal Clock item in the SETUP menu via the waveform file. When the clock frequency is changed, even if you switch to table or timing display mode, the clock frequency there is changed too.
Linking the Vertical Bar Cursors. The Cursor Link to... item appears when two or more waveforms are being edited simultaneously. This item is used to link the movement of the vertical bar cursors in different editing areas. For example, when the cursors in editing area 1 are linked to those in editing area 2, moving the one of the cursors in editing area 1 will cause the corresponding cursor in
AWG2021 User Manual | 3 !33 |