EDIT Menu
Time | Sets the horizontal axis unit to time. The cursor |
| position data at the top of the CRT is displayed in |
| time and data can be edited in time units. |
Point | Sets the horizontal axis unit to points. The cursor |
| position data at the top of the CRT is displayed in |
| points and data can be edited in points. |
In Figure 3
Point, while the display on the right shows this value set to Time.
Figure 3 !16: Setting the Unit for the Horizontal Axis
When the horizontal axis unit is changed, even if you switch to table or timing display mode, the horizontal axis there is changed too.
Setting Clock Frequency. When the unit of the horizontal axis is Time, the clock frequency can be set. The following diagram shows the menu configuration.
Setting More 1 of 2 |
| oriz. Unit Time |
| Clock |
|
| |||
|
|
|
|
|
Select Clock from the side menu to set the clock frequency. This parameter determines the time between the data points (the inverse of the clock frequency). For example, when the maximum clock frequency on the AWG2021 is set to
3 !32 | AWG2021 User Manual |