EDIT Menu

Setting Pattern Data Use Set Pattern to designate pattern data for the part of a data line or marker between the designated vertical bar cursors. Figure 3 -81 shows the pattern data menu that appears when you select Set Pattern from the sub-menu.

Figure 3 ￿81: Pattern Data Setting Menu

When the designated pattern is shorter than the area between the vertical bar cursors, the pattern data is repeated. You can create a variety of bit strings for the same pattern data by selecting Code in the menu.

Press the CURSOR button on the front panel to select the items needed for setting the pattern data. The following items can be selected; use the general purpose knob to set the desired value.

Cursor Position

(sets the position of the cursor)

Point/Step

(sets the number of points per step)

Code

(used to select the data code)

Entering Pattern Data and Pattern Length. To enter the pattern data, press the CURSOR button on the front panel and select Cursor Position. A knob icon will appear to the left of the Cursor Position area. The value next to ªCursor Positionº in the menu indicates the current position of the cursor.

Now you can use the numeric keys to enter the pattern data. Any value up to 32,768 bits can be entered for pattern data. However, only 40 bits can be displayed on the screen at one time; use the general purpose knob to scroll

3 ￿106

AWG2021 User Manual