EDIT Menu
Editing in the Frequency Domain
(7)Left vertical bar cursor The left cursor indicates the left starting point for editing. The active cursor will be brightly highlighted with dot lines.
(8)Right vertical bar cursor Indicates the right end point for editing.
(9) Button Operations | This area shows how the front panel buttons operate in this |
| menu. |
| Pressing the CURSOR button toggles the active vertical bar |
| cursor. |
| Pressing the VALUE or ENTER button puts the system into a |
| mode in which the magnitude at the frequency of the active |
| vertical bar cursor can be changed. |
| Pressing the VALUE or ENTER button puts the system into a |
| mode in which the phase at the frequency of the active vertical |
| bar cursor can be changed. |
| When Draw... has been selected, pressing the CURSOR |
| button moves the active vertical bar cursor. |
| When Draw... has been selected, pressing the VALUE or |
| ENTER button moves the point cursor. |
| When Draw... has been selected, pressing VALUE or ENTER |
| toggles the direction in which the point cursor moves from |
| vertical to horizontal or viceversa. |
Select Operation from the bottom menu to change the signal magnitude and phase in the frequency domain. The following items will appear in the side menu:
Right peak
Left peak
Draw...
Editing Magnitude. Here is the procedure for editing the magnitudes.
1.Select Operation from the bottom menu.
2.Press the CURSOR button on the front panel to select the left/right vertical bar cursor. Using the numeric keys or the general purpose knob, move the active vertical bar cursor to the frequency to be edited.
3 0200 | AWG2021 User Manual |