EDIT Menu

3.Press the VALUE button on the front panel and select Magnitude. The knob icon is displayed on the Magnitude side.

4.Using the general purpose knob or the numeric keys, change the magnitude.

5.To change the magnitude for another frequency, press the CURSOR button on the front panel, and use the general purpose knob to move the active vertical bar cursor to the frequency to be edited. Next, repeat Steps 3 and 4.

Editing Phase. Here is the procedure for editing the phase.

1.Select Operation from the bottom menu.

2.Press the CURSOR button on the front panel to select the left/right vertical bar cursor. Using the numeric keys or the general purpose knob, move the active vertical bar cursor to the frequency to be edited.

3.Press the VALUE button on the front panel and select Phase. The knob icon is displayed on the Phase side.

4.Using the general purpose knob or the numeric keys, change the phase.

5.To change the phase for another frequency, press the CURSOR button on the front panel, and use the general purpose knob to move the active vertical bar cursor to the frequency to be edited. Next, repeat Steps 3 and 4.

Searching for Peaks. Select Operation from the bottom menu to display the Right peak and Left peak items on the side menu. These items detect the signal peaks.

Right peak

The active vertical bar cursor is moved to the peak

 

in the signal to the right of the active vertical bar

 

cursor. Each time this item is selected, the peak

 

value moves to the right.

Left peak

The active vertical bar cursor is moved to the peak

 

in the signal to the left of the active vertical bar

 

cursor. Each time this item is selected, the peak

 

value moves to the left.

Drawing Magnitude and Phase. Use Draw... from the side menu to draw points between the left and right vertical bar cursors and then connect the points to create an arbitrary magnitude and phase. Immediately after you select the Draw... item, a point cursor will appear midway between the vertical bar cursors, in the center of the vertical axis. The following diagram shows the menu configuration for the Draw... item.

AWG2021 User Manual

3 ￿201