EDIT Menu

Add ￿raw Point ￿elete ￿raw Point

Operation ￿raw... ￿raw Area

Mag

￿o Back ￿xecute

Phase

Figure 3 -144 shows an example of the screen with the Draw... item selected.

Figure 3 ￿144: Menu Displayed When Draw... is Selected

When you select Draw... from the side menu, the following items will appear in the sub-menu: Add Draw Point, Delete Draw Point, Draw Area, Go Back and Execute. Each of these items will be explained below in detail.

1.Select Operation from the bottom menu, and then select Draw... from the side menu.

2.Press the CURSOR button on the front panel. Using the general purpose knob, move the left and right vertical bar cursors to define the frequency domain for drawing the magnitude or phase. Use the CURSOR button to toggle between the left and right vertical bar cursors.

3 ￿202

AWG2021 User Manual