SETUP Menu

To select a waveform or sequence file:

1.Select Waveform Sequence from the bottom menu. The waveform display area will be highlighted on the screen.

2.Select the channel for setting in the side menu.

3.Turn the general purpose knob to open the file list. Use the general purpose knob to select the desired waveform or sequence file from the list.

4.After the file has been selected, select O.K. in the sub-menu. The selected file will be confirmed and the waveform and file name will appear in the icon, as shown in the figure below.

When the file is confirmed, the output parameters for that file will be set automatically.

3 ￿218

AWG2021 User Manual