Tekxon Technology AWG2021 manual 423

Appendix A: Options and Accessories

Output Connector Configuration. Figure A-2 shows the shape and pin number location of the output connector, and Table A-1 shows the output signal for each pin.

35	68
1	34

Figure A*2: Output Connector

Table A*1: Output Signal

Pin Number	Signal	Pin Number	Signal
6	~CLOCK	39	CLOCK
14	~Data Bit 0	47	Data Bit 0
12	~Data Bit 1	45	Data Bit 1
10	~Data Bit 2	43	Data Bit 2
8	~Data Bit 3	41	Data Bit 3
16	~Data Bit 4	49	Data Bit 4
20	~Data Bit 5	53	Data Bit 5
22	~Data Bit 6	55	Data Bit 6
18	~Data Bit 7	51	Data Bit 7
30	~Data Bit 8	63	Data Bit 8
28	~Data Bit 9	61	Data Bit 9
26	~Data Bit 10	59	Data Bit 10
24	~Data Bit 11	57	Data Bit 11

Pins 4, 33, 34, 37, 67, and 68 are not connected.

Pins that are not mentioned are connected to chassis ground. ~ = active low signal

Operation. Operation is the same as for the basic instrument. When a waveform is not being output, the waveform's initial data may be output to the connector. At this time, no clock is generated.

When starting the waveform output, the clock is generated and the data is updated.

AWG2021 User Manual A*3