Appendix A: Options and Accessories

This chapter describes the options, and standard and optional accessories available for the AWG2021.

Options

The following options are available.

Option 02 (2-Channel Output)

Option 03 (ECL Digital Data Output)

Option 04 (TTL Digital Data Output)

Option 09 (FPP Board + FFT Editor/Convolution)

Option 1R (Rack Mount)

Option 1S (With WaveWriter S3FT400)

Option 95 (Certificate With Calibration Data)

Option B1 (With Service Manual)

Each of these options will be discussed in detail on the following pages.

Option 02 (2 Channel This option adds second channel. This results in a 2-channel display for SETUP, Output) MODE and FG menus. Also, two additional connectors are added on the rear

panel (CH2 MARKER1 OUT and CH2 MARKER2 OUT). See ªRear Panelº in Section 2 ªOverview.º

Option 03 (ECL Digital Option 03 provides the following signals at the rear±panel output connector. Data Output)

NOTE. An AWG2021 cannot be equipped with Option 03, Option 04 and Option 09 together. Select either Option 03, Option 04 or Option 09.

Data Output. The data (D0±D11) fed to theAWG2021 internal D/A converter is buffered and delivered to the output connector. At the same time that the analog waveform is output, the digital output can be obtained. The output is differential ECL output.

AWG2021 User Manual

A 1