Function Waveform Generator Mode

The sync signal is a 1.5 V signal into 50 W with a pulse width of 100 ns. These signals are output from the front panel CH1 SYNC connector and the rear panel CH2 SYNC OUT connector (for Option 02).

Marker Signal The marker signal is generated at the start point for the waveform data. It is a

2.5V signal into 50 W, whose pulse width varies with the frequency of the output signal (see Table 3-24, earlier in this section). These signals are output from the front panel CH1 MARKER1 output connector and the rear panel CH1 MARKER2 OUT connector. When Option 02, the CH2 option, is installed, the marker signals are output from the rear panel CH2 MARKER1 OUT and CH2 MARKER2 OUT connectors.

AWG2021 User Manual

3 ￿301