CARE AND MAINTENANCE

Your Pearl S telephone has been designed to provide years of trouble
free service. To ensure its longevity, please follow these maintenance
instructions:
1) Keep the Pearl S away from heat, as high temperatures can shorten
the life of the electricalcomponents, and distort or melt plastic
parts.
2) The telephone should be kept free of dust and moisture. If it
gets wet, wipe it dry immediately. Liquids may contain minerals
that can corrode electronic circuits.
3) Handle your telephone gently and carefully. Dropping it can
cause serious damage to internal circuitry or the plastic case,
which may result in malfunction.
4) Do not use any type of chemical or abrasive powder to clean the
outer casing. Use only mild detergents on a soft, damp cloth to
clean the telephone.
5) In case of trouble with the telephone, do not attempt to repair
the telephone yourself. Contact your distributor for assistance.
If the trouble is affecting the telephone lines, the phone company
or service provider may ask you to disconnect the telephone
until the problem is resolved.

APPROVALS

The Pearl S telephone has been approved to the following standards:
• iCTR37 and TBR38
• EN 60950: 2000
• EN 55022: 1998 Class B
• EN61000-4-2 1995 as required by EN 55024: 1998
• EN61000-4-3 1996 as required by EN 55024: 1998
• EN61000-4-4 1995 as required by EN 55024: 1998
• EN61000-4-5 1995 as required by EN 55024: 1998
• EN61000-4-6 1996 as required by EN 55024: 1998
• EN61000-4-8 1995 as required by EN 55024: 1998

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETYPRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY
TO PERSONS, INCLUDING THE FOLLOWING:
1. READ AND UNDERSTAND ALLINSTRUCTIONS.
2. FOLLOW ALLWARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.
3. UNPLUG THE PRODUCTFROM THE WALL OUTLET BEFORE CLEANING. DO NOTUSE
LIQUID CLEANER OR AEROSOLCLEANERS. USE ADAMP CLOTH FOR CLEANING.
4. DO NOTUSE THIS PRODUCT NEAR WATER, FOR EXAMPLE: NEAR ABATHTUB, WASH
BOWL, KITCHEN SINK OR LAUNDRYTUB, IN AWET BASEMENT, OR NEAR ASWIMMING POOL.
5. DO NOTPLACE THIS PRODUCT ON AN UNSTABLE CART, STAND OR TABLE. THE PROD-
UCTMAY FALL, CAUSING SERIOUS DAMAGE TO THE PRODUCT.
6. SLOTS AND OPENINGS IN THE CABINETAND THE BACK OF BOTTOM ARE PROVIDED
FOR VENTILATION. THESE OPENINGS MUSTNOT BE BLOCKED OR COVERED. THE
OPENINGS SHOULD NEVER BE BLOCKED BYPLACING THE PRODUCT ON ABED, SOFA,
RUG OR ANYOTHER SIMILAR SURFACE. THIS PRODUCTSHOULD NEVER BE PLACED
NEAR OR OVER ARADIATOR OR HEATREGISTER. THIS PRODUCT SHOULD NOT BE
PLACED IN ABUILT-IN INSTALLATION UNLESS PROPER VENTILATION IS PROVIDED.
7. NEVER PUSH OBJECTS OF ANYKIND INTO THIS PRODUCT THROUGH CABINETSLOTS
AS THEYMAY TOUCH DANGEROUS VOLTAGE POINTS OR CAUSE ASHORTCIRCUIT THAT
COULD RESULTIN AFIRE OR ELECTRIC SHOCK. NEVER SPILL LIQUID OF ANY KIND ON
THE PRODUCT.
8. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTDISASSEMBLE THIS PRODUCT.
IF SERVICE IS NECESSARY, SEND OR TAKE THE TELEPHONE TO AQUALIFIED SERVICE
FACILITY. OPENING OR REMOVING COVERS MAYEXPOSE YOU TO DANGEROUS VOLT-
AGES OR OTHER RISKS. INCORRECTREASSEMBLY CAN CAUSE ELECTRIC SHOCK
WHEN THE APPLIANCE IS SUBSEQUENTLYUSED.
9. UNPLUG THIS PRODUCTFROM THE WALL OUTLETAND REFER SERVICING TO QUALI-
FIED SERVICE PERSONNELUNDER THE FOLLOWING CONDITIONS:
• IF THE POWER SUPPLYCORD OR PLUG IS DAMAGED OR FRAYED
• ID LIQUID HAS BEEN SPILLED INTO THE PRODUCT
• IF THE PRODUCTHAS BEEN EXPOSED TO RAIN OR WATER
• IF THE PRODUCTDOES NOT OPERATE NORMALLYBY FOLLOWING THE
OPERATING INSTRUCTIONS. ADJUSTONLYTHOSE CONTROLS THAT ARE
COVERED BYTHE OPERATING INSTRUCTIONS, AS IMPROPER ADJUSTMENTOF
OTHER CONTROLS MAYRESULTIN DAMAGE AND WILL OFTEN REQUIRE
EXTENSIVE WORK BYA QUALIFED TECHNICIAN TO RESTORE THE PRODUCTTO
NORMALOPERATION.
• IF THE PRODUCTHAS BEEN DROPPED OR THE CABINET HAS BEEN DAMAGED.
• IF THE PRODUCTEXHIBITS A DISTINCTCHANGE IN PERFORMANCE.
10. AVOID USING THE TELEPHONE DURING AN ELECTRICALSTORM. THERE MAYBE A
REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.
11. DO NOTUSE THE TELEPHONE TO REPORTA GAS LEAK IN THE VICINITY OF THE
LEAK.
IF YOUR PRODUCTUSES BATTERIES, FOLLOW THESE ADDITIONALPRECAUTIONS:
1. USE ONLYTHE TYPE AND SIZE OF THE BATTERYSPECIFIED.
2. DO NOTDISPOSE OF BATTERIES IN AFIRE. THE BATTERIES CAN OR MAY EXPLODE.
CHECK LOCALCODES FOR PROPER BATTERY DISPOSALINSTRUCTIONS.
Teledex,LLC
6311 San Ignacio Avenue
San Jose,CA 95119
Telephone: (408) 363-3100
Fax: (408) 363-3136
email: sales@teledex.com
Internet: www.teledex.com
Copyright ©2002 Teledex LLC
All Rights Reserved.
Part Number: 600-0480-63
MAIN DIAGRAM RIGHT VIEW

LEFT VIEW

WALL MOUNTING

Handset Volume Speaker Volume
Handset Coil Cord
Handset Jack
Data Port
Cord Channel
Wall Jack
Wall Mount Clip
(under handset)
Handset
Ringer Volume
Data Port
Line Jack
Handset Volume
Mute Key
Redial Key
Flash Key
Speaker Volume
Store Key (hidden)
Guest Service Keys
Dial Pad
Speakerphone Key Hold Key Message Waiting Indicator