Teledyne 200EH/EM - page 72

Operating Instructions Teledyne API - Model 200EH/EM Operation Manual
58
A
1:NXCNC1=100 PPM
1
A2:N0CNC1=100 PPM1
A3:N2CNC1=25 PPM1
A4:NXCNC2=100%1
NOX STB
SAMP FLOW
0ZONE FLOW
PMT
NORM PMT
AZERO
HVPS
RCELL TEMP
BOX TEMP
PMT TEMP
MF TEMP
O2 CELL TEMP2
MOLY TEMP
RCEL
SAMP
NOX SLOPE
NOX OFFSET
NO SLOPE
NO OFFSET
O2 SLOPE2
O2 OFFSET2
TIME
SAMPLE A1:NXCNC1=100 PPM
1
NOX = XXX
< TST TST > CAL SETUP
1
Default settings for user
selectable reporting range
settings.
2 Only appears if O2 sensor
o
p
tion is installed.
Refer to
Section
6.2.1 for
definitions
of these
test
functions.
Toggle <TST TST> keys to
scroll throu
g
h list of functions
Figure 6-6-2: Viewing M200EH/EM TEST Functions
NOTE
A value of “XXXX” displayed for any of the TEST functions indicates an out-of-range
reading or the analyzer’s inability to calculate it.
All pressure measurements are represented in terms of absolute pressure. Absolute,
atmospheric pressure is 29.92 in-Hg-A at sea level. It decreases about 1 in-Hg per 300
m gain in altitude. A variety of factors such as air conditioning and passing storms can
cause changes in the absolute atmospheric pressure.
04521C (DCN5731)