Teledyne T200H/M

Operating Instructions Teledyne API - Model T200H/T200M Operation Manual

4.7.2.7. Number of Records

The DAS is capable of capturing several months worth of data, depending on the

configuration. Every additional data channel, parameter, number of samples setting etc.

will reduce the maximum amount of data points somewhat. In general, however, the

maximum data capacity is divided amongst all channels (max: 20) and parameters (max:

50 per channel).

The DAS will check the amount of available data space and prevent the user from

specifying too many records at any given point. If, for example, the DAS memory space

can accommodate 375 more data records, the ENTR key will disappear when trying to

specify more than that number of records. This check for memory space may also make

an upload of an DAS configuration with APICOM or a Terminal program fail, if the

combined number of records would be exceeded. In this case, it is suggested to either

try from the front panel what the maximum number of records can be or use trial-and-

error in designing the DAS script or calculate the number of records using the DAS or

APICOM manuals. To set the number of records for one channel from the front panel,

follow the instruction shown in section 4.7.2.2 then press.

Edit Data Channel Menu

SETUP X.X 0) CONC: ATIMER, 8, 80

PREV NEXT INS DEL EDIT PRNT EXIT

Exits to the main

Data Acquisition

SETUP X.X NAME:CONC

<SET SET> EDIT PRINT EXIT

SETUP X.X NUMBER OF RECORDS:000

<SET SET> EDIT PRINT EXIT

SETUP X.X REPORT PERIODD:DAYS:

0 0 0 0 0 ENTR EXIT

ENTR accepts the new

setting an d returns to the

previous menu.

EXIT ignores the new setting

and returns to the previous

menu.

Toggle buttons to set

number of records

(1-99999)

SETUP X.X EDIT RECOPRDS (DELET DATA)

YES NO

NO returns to the

previo us menu.

YES will delete all data

in this channel.

Press SET> key until…

From the DATA ACQUISITION menu

(see Section 6.7.2.2)

07270B DCN6512