16
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
SECTION FOUR DO’S AND DON’TS
DO’S
; Read the Operators Manual thoroughly before using the instrument.
; Calibrate once per shift, and prior to each and every use.
; Check the high and low alarm threshold settings prior to use.
; Replace the batteries immediately when required.
; Keep the instrument, cable and sensor dry at all times.
; Re-calibrate after changing the sensor or batteries.
; Visually inspect the whole instrument prior to use.
; Check the integrity of all cable connections routinely.
; Remove and carefully store the “flow diverter” when using the ins trument in “static”
environments such as incubators, oxygen hoods etc.
; Perform an alarm functionality test prior to each use.
; Remove batteries if the instrument is not to be used for a month plus
DON’TS
: Use the Accurox Oxygen Monitor if you suspect any malfunction.
: Use the monitor in the presence of flammable anaesthetics.
: Autoclave the instrument and/or the sensor.
: Submerge the instrument and/or sensor in water or any other liquid.
: Expose instrument to other equipment with high levels of RFI emis sion.
: Place the instrument itself in a water vapour saturated environm ent.
: Expose the LCD to excessive direct sunlight
: Dispose of the sensor cell in fire, or place in an incinerator.