Ultra Trace Oxygen Analyzer Installation 3

3-1

Teledyne Analytical Instruments
Installation
Installation of the Model Ultra Trace 3000 Analyzer includes:
1. Unpacking
2. Mounting
3. Gas connections
4. Electrical connections
5. Installing the Micro-Fuel Cell
6. Testing the system.

3.1 Unpacking the Analyzer

Although the analyzer is shipped complete, certain of the parts, such as
fuses and sensors, are wrapped separately to be installed on site as part of the
installation. Carefully unpack the analyzer and inspect it for damage. Imme-
diately report any damage or shortages to the shipping agent.

3.2 Mounting the Analyzer

The Model Ultra Trace 3000 is for indoor use in a general purpose
area. It is NOT for hazardous environments of any type.
The standard model is designed for flush panel mounting. Figure 3-1 is
an illustration of the Ultra Trace 3000 standard front panel and mounting
bezel. There are four mounting holes—one in each corner of the rigid frame.
The drawings section in the rear of this manual contains outline dimensions
and mounting hole spacing diagrams.
On special order, a 19" rack-mounting panel can be provided. For rack
mounting, one Ultra Trace 3000 series analyzer is flush-panel mounted on
the rack panel. See Appendix for dimensions of the mounting panel.