Telenetics DSP 9612 manual SW2 DIP Switch Settings

Configuring the Modem

SW2 DIP Switch Settings

SW2 is an 8-position DIP switch. Table 2-3 shows the modem switch settings for DIP switch SW2. A description of the SW2 switch settings follows the table.

Table 2-3. Modem Switch Settings for DIP Switch SW2

Switches		Switch Settings
	ON		OFF (Default)
SW2-1: FSK Mode (page 18)	V.23		Bell 202
SW2-2: Receiver Squelch (page 18)	Turnaround		Turnaround
(valid for FSK mode, 2-wire half-duplex	Squelch (Bell		Squelch (Bell 202):
operation only)	202): 8ms		0ms
	Turnaround		Turnaround
	Squelch (V.23):		Squelch (V.23):
	150ms		0ms
SW2-3: FSK Soft Carrier (page 19)	Disabled		Enabled
SW2-4 and SW2-5: FSK RTS-CTS		(see Table 2-4)
Delay (page 19)
SW2-6: FSK CD Delay (page 20)	23ms		6ms
SW2-7: Remote Loopback (page 20)	Enabled		Disabled
SW2-8: Reserved (Test Only) (page 20)	Test		Normal

Page 17