5. Configure the IPF-2002L Using Keypad
Keys | Function |
SPD / HOLD | To change settings when using the keypad configuration |
REDIAL / MUTE | To main menu options when using the keypad configuration |
VOL - | To the next page when using the keypad configuration |
VOL + | To the previous page when using the keypad configuration |
Enter | To confirm the setting when using the keypad configuration |
5.1 Network Settings:
The default network setting for
If the network environment is PPPoE or Static IP, please change the network setting on your phone to PPPoE or Static IP. You can use the keypad to change your phone network setting. If you don’t know what kind of network environment you are at, please contact your Internet Service Provider.
Use the keypad configuration and choose the【network settings】. Please configure your phone
to DHCP, Static, or PPPoE according to your network environment.
5.1.1 PPPoE Setting
1.Connect the PPPoE network to the
2.Press 1234# (Hold the “#” key) Æ LCD shows【password】Æ Press 1234 and then press ENTER Æ LCD shows 【network settings】.
3.Press ENTER Æ LCD shows 【iptype】Æ press SPD/HOLD Æ Blinking cursor Æ Press 2 and then press ENTER. (2 sets your networking settings the PPPoE mode)
4.Press ENTER Æ LCD shows 【pppid】Æ Press SPD/HOLD Æ Input PPPoE account number and then press ENTER.
5.Press ENTER Æ LCD shows【pppin】Æ Press SPD/HOLD Æ Input PPPoE password and then press ENTER Æ Press ENTER again to complete the configuration.
If you want to input symbols or characters such as @, A, a, B, b, C, c, please refer to the keypad mapping table in Appendix 10.1.
12
