Manuals / Telex / Home Audio / Speaker

Telex technical manual Technical Manual, Model SS-1002, Models SS-2002, Model SS-2002RM

Models: SS-1002

1 26

Download 26 pages 63.84 Kb

Page 1

Model SS-1002

Model SS-1002

Single-Channel Intercom Speaker Station

Models SS-2002

Two-Channel Intercom Speaker Station

Model SS-2002 RM

Two-Channel Rack Mount Intercom Speaker Station

Technical Manual

9350-7741-000 Rev E

07/2009

Image 1

Telex technical manual Technical Manual, Model SS-1002, Models SS-2002, Model SS-2002RM, 9350-7741-000Rev E, 07/2009

FAQ

What is the difference between SS-1002, SS-2002, and SS-2002RM?

The SS-1002 is a single-channel intercom speaker station, while the SS-2002 and SS-2002RM are two-channel intercom speaker stations.

Where can I find the technical specifications for these models?

The technical specifications are included in the 9350-7741-000Rev E manual, dated 07/2009.

How do I know which model is suitable for my needs?

You can refer to the specifications in the technical manual to determine which model best fits your requirements.

Contents

Model SS-1002 Technical ManualModels SS-2002 Model SS-2002RMShipping to the Manufacturer FCC StatementDESCRIPTION SS-2002RMINSTALLATION Table of ContentsOPERATION AND SPECIFICATIONS INTRODUCTIONPage Introduction IntroductionDescription CHAPTERFeatures 13.Sidetone Trimmers 14.Balanced/Unbalanced Selector SwitchFIGURE 2. SS-2002RMFeatures Configuration Pre-check InstallationDIP Switches To access the internal controls, do the followingMic Kill Receive Call Signal CompatibilityIncoming Call Beep Microphone TypeHeadset Connector Notes Balanced/Unbalanced SwitchPanel Mic Connector Notes Speaker Beep for Incoming CallIntercom Channel Connections Description of Phantom-PoweredConnectionDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines FIGURE 8. Audiocom mode connections for an SS-1002Intercom Station in a U box. For Clear-Comconnection, use the Unbalanced Mode Intercom Channel pin out information listed in “Specifications” on page FIGURE 10. Audiocom cable wiring diagrams Power Up Operation and SpecificationsSidetone Adjustment To power up the SS1002/2002, do the followingHeadset/Headphone/Speaker/Microphone Selection Channel Select SS-2002& SS-2002RMOnlyReceiving Calls To use headphones with a gooseneck microphone1.Select the desired intercom channel Calling an Intercom ChannelSpeaker Output Power SpecificationsGeneral Dynamic-micHeadset/HandsetFIGURE 11. Dimensions DimensionsPage SS1002/2002 Supplemental Information Installing the Box to the FaceplateXLR Connector on Box XLR Connector on BoxXLR Connector on Box XLR Connector on BoxTerminal Strip on Circuit Board Description