Telex SS-1002 technical manual XLR Connector on Box, Terminal Strip on Circuit Board, Description

TABLE 4. SS2002 Wire Connection for use in Audiocom System

XLR Connector on Box	Terminal Strip on Circuit Board	Description
Pin 1	TB1-1	Common
Pin 2	No connection
Pin 3	TB1-3	Audiocom Channel 1 audio low and +24VDC phantom
		power
Pin 4	TB1-4	Audiocom Channel 1 audio high and +24VDC phantom
		power
Pin 5	TB1-5	Audiocom Channel 2 audio low and +24VDC phantom
		power
Pin 6	TB1-6	Audiocom Channel 2 audio high and +24VDC phantom
		power
TABLE 5. SS2002 Wire Connections for use in Clear-com System
XLR Connector on Box	Terminal Strip on Circuit Board	Description
Pin 1	TB1-1	Common
Pin 2	TB1-3	Clear-com power input
Pin 3	TB1-6	Clear-com Line B1
Pin 4	TB1-4	Clear-com Line A1
Pin 5	No Connection
Pin 6	No Connection

1. When connected as shown, Clear-com Line A corresponds to SS2002 Ch 1 and Clear-com Line B corresponds to SS2002 Ch 2.

Step 2. Assemble the Faceplate to the Box

Use the four (4) screws supplied with the faceplate.

Step 3. Install the Intercom Station

Refer to the User Instructions for further information.

22