Kramer Electronics user manual VP-770 Connecting the VP-770

6.Connect the audio input signals to the AUDIO IN connectors (3.5mm mini jack and RCA connectors), as required (not shown in Figure 4).

7.Connect the PC VIDEO OUTPUT 15-pin HD connector to a VGA acceptor (for example, an analog display).

8.Connect the HDMI VIDEO OUTPUT connector to an HDMI acceptor (for example, a plasma display).

9.Connect the DGKAT RJ-45 connector to a receiver (for example, the Kramer PT-572+).

10.Connect the SPKR Terminal Block connector to speakers (not shown in Figure 4).

11.Connect the SPKR block connector to a pair of loudspeakers, by connecting the left loudspeaker to the “L+” and the “L-” terminal block connectors, and the right loudspeaker to the “R+” and the “R-” terminal block connectors. Do not Ground the loudspeakers (not shown in Figure 4).

12.If required, you can connect a PC and/or controller to the:

RS-232 terminal block (see Section 8.4)

Ethernet connector (see Section 8.5)

13.Connect the power cord (not shown in Figure 4).

VP-770 - Connecting the VP-770 13