Kramer Electronics VP-770 user manual Selecting the Correct Aspect Ratio, Setting

Setting

Output continued

Zoom

Position

Zoom

i

Function

Note that Follow Output sets the Deep Color of the HDMI and the DGKat outputs independently, according to the screen connected to each output

i	A change in the Deep Color setting will take effect after there is a
	hot plug on the HDMI/DGKat output or if the user selects a new
	output resolution.

Color Space – to RGB, YPbPr422 or YPbPr444

HDCP Mode

Define the HDMI out HDCP activation policy. Set to:

Follow Input – to activate the HDCP on all HDMI outputs in the case that the video on the Main or PiP window is HDCP encrypted.

Follow Output (This option is recommended when the HDMI output is connected to a splitter/switcher) – to activate the HDCP per output according to the setting of the HDMI acceptor to which it is connected; that is, if the HDMI acceptor is not HDCP compliant, the VP-770always outputs without HDCP and vice versa.

Not that the VP-770will output a green screen if the output acceptor to which it is connected is not HDCP compliant, in the case that the video on the Main or PiP window is HDCP encrypted.

Set H Position and V Position, the horizontal and vertical zoom positions respectively, to zoom into certain areas of the image M/P

Lets you “move” the zoom area (same as scanning an area with a magnifying glass)

Set the zoom M/P

Zooms into the center of the display.

When zooming in the Freeze state, in case the input resolution is larger than the output resolution, the image may be cut-off or change its position. This can be fixed via Zoom Position (above).

Note that any change in the output resolution will cancel the zoom setting.

6.7.1Selecting the Correct Aspect Ratio

You can configure the aspect ratio of any output image to fit your application. The VP-770offers four different aspect ratio settings: Follow Input, Follow Output, Best Fit and Letterbox. Here is how each of these settings works.

FOLLOW INPUT – The aspect ratio and resolution of the input video or graphics signal are both preserved (no scaling). For example, a composite video image with a 4:3 aspect ratio will appear with the same aspect ratio on a 1080p (16:9) output image, surrounded by black bars

FOLLOW OUTPUT – The aspect ratio and resolution of the input signal is re-sized to precisely match the aspect ratio and resolution of the VP-770output signal. This may result in some distortion to the input signal images

VP-770 - The OSD Menu 33