Kramer Electronics VP-770 - page 26

VP-770 - The OSD Menu

21

21

Setting

Function

Input Settings

Set the:

H Image Shift – to set the horizontal position of the image within the

window M/P

Volatile parameter

V Image Shift – to set the vertical position of the image within the window

M/P

Volatile parameter

Auto Positioning – to search the input image during the tuning process

and automatically position it on the output window in a perfect fit.

Set to Off to disable auto positioning

Set to Normal Scan to perform a normal range image search

Set to Wide Scan to perform a wide range image search M/P

In the Normal/Wide Scan option, the machine automatically adjusts all the PC

input video resolutions (PC 1 and PC 2). For the other inputs, the machine

automatically adjusts all the input video resolutions except for HD/SD (CEA 861

standard) video resolutions

HDCP Mode – to select the HDCP option for the HDMI input: either ON (the

default) or OFF.

Setting HDCP mode to Off on the HDMI input allows the source to transmit

a non-HDCP signal if required (for example, when working with a Mac

computer).

EDID Select – to select the native resolution on each input (HDMI, DP and

VGA inputs) to be read by the video source connected to that input:

1024x768@60, 1280x800@60, 1280x1024@60, 1366x768@60,

1440x900@60, 1400x1050@60, 1600x900@60, 1600x1200@60,

1680x1050@60, 1920x1200@60RB, 720p50, 720p60, 1080p50, 1080p60

(default), 2K50 or 2K60

Note that for the HDMI and DP inputs, you can either select the color depth

to be 8bpp or 12bpp after selecting the native resolution

Note that when the EDID is set on the inputs, the changes are

per input and immediate for PC 1, PC 2 and DP inputs.

Setting the EDID on any one of the HDMI inputs affects that

HDMI input immediately (the VP-770 automatically issues a hot-

plug) and will affect the other HDMI video source only after a

hot-plug occurrence on that input.

For example, if the EDID is selected for HDMI2 it will affect the

HDMI2 input immediately; the HDMI1 EDID will take effect

following a hot-plug.

Color Space – to select the color space for the PC and HDMI inputs: RGB,

YPbPr or Follow Input

Note that if the machine is set to the dual display mode, and both the Main

and PiP windows display the same input, you need to set the same input

color space value for both windows

i

Contents

Main USE R MAN UAL Page Page Page Page 1 Introduction 2 Getting Started ! 2.1 Achieving the Best Performance ! 2.2 Safety Instructions 2.3 Recycling Kramer Products 3 Overview Port tunneling, bidirectional RS-232 interface simple control commands Page Page 3.1 HDCP Compliance 3.2 About the Power Connect Feature 3.3 Using Twisted Pair Cable 3.4 Defining the VP-770 Presentation Switcher/Scaler Figure 1: VP-770 Presentation Switcher/Scaler Front Panel VP-770 Overview 8 Feature # VP-770 Overview 9 Function Feature # Page 4 Installing in a Rack 5 Connecting the VP-770 ! Page Page 5.1 Wiring the TP LINE IN / LINE OUT RJ-45 Connectors i This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45 connectors. Note, that the cable Ground shielding must be connected / soldered to the connector shield. 5.2 Microphone Pinout 5.3 Audio Input Pinout 6 The OSD Menu 6.1 OSD Menu Operation Example Page Page 6.2 The Input Menu Page 6.2.1 Window Customization 23 6.2.1.1 Changing the Size of the Main and/or PiP Window Page Page Page 6.3 The Audio Menu Page 6.4 The Process Menu 6.5 The Picture Menu 6.6 The Enhance Menu 6.7 The Scale Menu 33 6.7.1 Selecting the Correct Aspect Ratio Page 6.8 The Miscellaneous Menu Page Page 6.8.2 The Emergency Alert System Page 6.8.2.1 EAS Requirements 41 7 The Display Modes 7.1 The Single Window Display Mode 7.1.1 Activating the Single window Mode 7.2 The Dual Window Display Mode Page 43 7.2.1 Activating the Dual Window Mode 7.2.2 Setting the OSD Menu to PiP Window Control Page 45 7.2.3.4 Selecting the PiP Source via the OSD Menu 8 Controlling the VP-770 8.1 Controlling via the Front Panel Buttons 8.1.1 Using the INPUT Front Panel buttons 47 8.2 Controlling via the OSD Menu 8.3 Controlling via the VP-770 Web Pages 8.3.1 Connecting to the VP-770 via your Browser 8.4 Connecting to the VP-770 via RS-232 8.5 Connecting the VP-770 via the ETHERNET Port 8.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) Page 8.5.3 Ethernet Port Configuration and Control ! 8.6 Controlling the VP-770 via the REMOTE Terminal Block Connector Page 8.7 Controlling via the Infrared Remote Control Transmitter 53 8.7.1 Using the IR Transmitter 9 Port Tunneling Page 10 Flash Memory Upgrade 11 Technical Specifications 11.1 Default Communication Parameters 11.2 Input Resolutions This section defines the input resolutions for each input 11.2.1 PC Input Resolutions 59 11.2.2 DP Input Resolutions 11.2.3 YUV Input Resolutions 11.2.4 CV Input Resolutions NTSC and PAL 11.3 Output Resolutions This section defines the output resolutions 11.3.1 HDMI Output Resolutions 11.3.2 PC Output Resolutions 12 The VP-770 RS-232 Communication Protocol 12.1 Using the Communication Protocol 12.2 Communication Protocol Mimicking OSD 12.2.1 Using the Communication Protocol with Protocol 3000 (the Y Command) 63 12.2.2 Using the Communication Protocol with Legacy Protocol 12.2.3 Protocol Table: Mimicking OSD table are therefore grayed out. The following table defines the protocol commands: VP-770 - The VP-770 RS-232 Communication Protocol 65 1st Level Func. Range Page Page Page Page Page VP-770 - The VP-770 RS-232 Communication Protocol 71 Response Syntax 12.3 Protocol Table: Mimicking Remote and Front Panel Buttons Keystroke Code 12.4 The Protocol 3000 Common Operation Commands Operation commands Command Lock front panel LOCK-FP LOCK-MODE Page #CR Page Page Page !