Setting |
|
|
|
|
|
| Function | ||||||
Embedded | Set: |
|
|
|
|
|
|
|
|
|
|
| |
| |||||||||||||
| without any processing or set to Off to process the digital audio input | E |
|
|
| ||||||||
|
| i | Note that this feature is disabled for the | ||||||||||
|
|
| |||||||||||
|
|
| (PC, CV, YUV). | ||||||||||
|
|
| In case the audio signal is encrypted or compressed set the Pass- | ||||||||||
|
|
| through to On. Note that in some cases there may not be sufficient | ||||||||||
|
|
| capacity to accurately transmit the audio. | ||||||||||
| Analog Takeover – to On for the analog inputs of the HDMI and DP inputs | ||||||||||||
| to take over the embedded inputs; select Off to use the embedded inputs | E | . | ||||||||||
| Analog takeover is available only if an unbalanced audio signal is connected | ||||||||||||
| (via the 3.5mm connecter). The embedded audio is disabled as long as the | ||||||||||||
| 3.5mm cable is connected to the 3.5mm mini jack | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
Delay | Set: |
|
|
|
|
|
|
|
|
|
|
| |
| Lip Sync delay value [msec] | E |
|
|
| ||||||||
| Mic Delay value [msec] | E |
|
|
| ||||||||
|
| ||||||||||||
Power | Set the power amplifier (SPKR) level to Off or to levels 1 to 4 | E |
| ||||||||||
Amplifier | This submenu item is specific for the power amplifier, on top of the general volume | ||||||||||||
| |||||||||||||
| level |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| ||||||||||
SDI |
| i | Note that SDI is not applicable to the | ||||||||||
Channeling |
| transparent in the OSD. The commands related to SDI in the | |||||||||||
|
| OSD menu are therefore grayed out. | |||||||||||
If the transparency of the OSD menu is set to ON this menu item will become invisible (see Section 6.8)
Figure 18: Set the Output Volume Level
28 |
|
|
|
