![](/images/new-backgrounds/1195365/19536547x1.webp)
Note that:
∙A selected parameter that turns gray becomes valid immediately. You can press Enter at this point to save these parameter changes to the memory immediately (the screen will display “Saving Data” for a split second).
∙In any case, exiting the menu saves the parameter to the memory
∙Data is saved per window and per input (to a dedicated input + window memory), as applicable
The control buttons let you control the
∙MENU (or ) button to enter the menu, exit the menu, and when in the OSD menu, move to the previous level and change menu settings in the OSD screen.
∙
∙
∙
i
ENTER (or ) button to access
Arrow buttons to move through the OSD menu
Up or down arrows to change settings (changes are immediate)
Note that when exiting the menu, all the changes are automatically saved to the
The default OSD timeout for auto exit is set to 30 seconds and can be changed (see Section 6.8).
6.1.1OSD Control Icons
The following three icons: ,
, and
are included to indicate when functionality applies to the Main window, the PiP Window or the entire system:
∙ for Main Window Control
∙ for PiP window Control
∙ for Entire System Control
| 19 |
|
|