Manuals
/
Brands
/
Computer Equipment
/
Projector
/
Kramer Electronics
/
Computer Equipment
/
Projector
Kramer Electronics
VP-770 user manual
- page 2
1
2
82
82
Download
82 pages, 3.74 Mb
Contents
Main
USE R MAN UAL
Page
Page
Page
Page
1 Introduction
2 Getting Started
!
2.1 Achieving the Best Performance
!
2.2 Safety Instructions
2.3 Recycling Kramer Products
3 Overview
Port tunneling, bidirectional RS-232 interface simple control commands
Page
Page
3.1 HDCP Compliance
3.2 About the Power Connect Feature
3.3 Using Twisted Pair Cable
3.4 Defining the VP-770 Presentation Switcher/Scaler
Figure 1: VP-770 Presentation Switcher/Scaler Front Panel
VP-770 Overview
8
Feature
#
VP-770 Overview
9
Function
Feature
#
Page
4 Installing in a Rack
5 Connecting the VP-770
!
Page
Page
5.1 Wiring the TP LINE IN / LINE OUT RJ-45 Connectors
i
This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45 connectors.
Note, that the cable Ground shielding must be connected / soldered to the connector shield.
5.2 Microphone Pinout
5.3 Audio Input Pinout
6 The OSD Menu
6.1 OSD Menu Operation Example
Page
Page
6.2 The Input Menu
Page
6.2.1 Window Customization
23
6.2.1.1 Changing the Size of the Main and/or PiP Window
Page
Page
Page
6.3 The Audio Menu
Page
6.4 The Process Menu
6.5 The Picture Menu
6.6 The Enhance Menu
6.7 The Scale Menu
33
6.7.1 Selecting the Correct Aspect Ratio
Page
6.8 The Miscellaneous Menu
Page
Page
6.8.2 The Emergency Alert System
Page
6.8.2.1 EAS Requirements
41
7 The Display Modes
7.1 The Single Window Display Mode
7.1.1 Activating the Single window Mode
7.2 The Dual Window Display Mode
Page
43
7.2.1 Activating the Dual Window Mode
7.2.2 Setting the OSD Menu to PiP Window Control
Page
45
7.2.3.4 Selecting the PiP Source via the OSD Menu
8 Controlling the VP-770
8.1 Controlling via the Front Panel Buttons
8.1.1 Using the INPUT Front Panel buttons
47
8.2 Controlling via the OSD Menu
8.3 Controlling via the VP-770 Web Pages
8.3.1 Connecting to the VP-770 via your Browser
8.4 Connecting to the VP-770 via RS-232
8.5 Connecting the VP-770 via the ETHERNET Port
8.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable)
Page
8.5.3 Ethernet Port Configuration and Control
!
8.6 Controlling the VP-770 via the REMOTE Terminal Block Connector
Page
8.7 Controlling via the Infrared Remote Control Transmitter
53
8.7.1 Using the IR Transmitter
9 Port Tunneling
Page
10 Flash Memory Upgrade
11 Technical Specifications
11.1 Default Communication Parameters
11.2 Input Resolutions
This section defines the input resolutions for each input
11.2.1 PC Input Resolutions
59
11.2.2 DP Input Resolutions
11.2.3 YUV Input Resolutions
11.2.4 CV Input Resolutions
NTSC and PAL
11.3 Output Resolutions
This section defines the output resolutions
11.3.1 HDMI Output Resolutions
11.3.2 PC Output Resolutions
12 The VP-770 RS-232 Communication Protocol
12.1 Using the Communication Protocol
12.2 Communication Protocol Mimicking OSD
12.2.1 Using the Communication Protocol with Protocol 3000 (the Y Command)
63
12.2.2 Using the Communication Protocol with Legacy Protocol
12.2.3 Protocol Table: Mimicking OSD
table are therefore grayed out.
The following table defines the protocol commands:
VP-770 - The VP-770 RS-232 Communication Protocol
65
1st Level
Func.
Range
Page
Page
Page
Page
Page
VP-770 - The VP-770 RS-232 Communication Protocol
71
Response
Syntax
12.3 Protocol Table: Mimicking Remote and Front Panel Buttons
Keystroke Code
12.4 The Protocol 3000 Common Operation Commands
Operation commands Command
Lock front panel LOCK-FP LOCK-MODE
Page
#CR
Page
Page
Page
!