42 43
Handset settings

Handset tones on/off

Your Telstra 7300/7300a has a series of tones designed to alert you to certain situations. A tone will
sound: when the battery is low; when you move out of range of the base and there is no coverage; to
confi rm each button press (key beeps). You can switch the handset tones on or off.
1. Press 8PY` to open the main menu.
2. Press .LWW^ or until the display shows Setup h/set and press 8PY` .
3. Press .LWW^ or until Warning Tones is displayed, press 8PY` to select.
4. Press .LWW^ or to select the tone you want and press 8PY` to select.
5. Press .LWW^ or to display either On or Off and press 8PY` to confirm.
6. You hear a confirmation tone and Saved is displayed.
7. Press and hold 8`_P to return to standby.

Handset name

You can give each handset a name up to a maximum of 11 characters, for example “Kitchen”. It will still
display its number.
1. Press 8PY` to open the main menu.
2. Press .LWW^ or until the display shows Setup h/set and press 8PY` .
3. Press .LWW^ or until Handset name is displayed, press 8PY` to select.
4. Press 8`_P to delete characters and use the keypad to enter the name you want, then press 8PY` to
confirm.
Handset settings

Ringer melody

There are 6 different ringer melodies to choose from.
1. Press 8PY` to open the main menu.
2. Press .LWW^ or until the display shows Setup h/set and press 8PY` .
3. Ring melody is displayed, press 8PY` to select. The current melody is played for 5 seconds.
4. Press .LWW^ or to select your preferred melody.
5. Press 8PY` to save. You hear a confirmation tone and Saved is displayed.
6. Press and hold 8`_P to return to standby.

Ringer volume

There are 5 different ringer volume levels to choose from.
1. Press 8PY` to open the main menu.
2. Press .LWW^ or until the display shows Setup h/set and press 8PY` .
3. Press .LWW^ or until Ring volume is displayed, press 8PY` to select. The selected ringer melody
is played at the current volume for 5 seconds.
4. Press .LWW^ or to select your preferred volume.
5. Press 8PY` to save. You hear a confirmation tone and Saved is displayed.
6. Press and hold 8`_P to return to standby.