60 61

Answer delay

Answer delay sets the number of rings before your Telstra 7300a answering machine picks up a call.
The default setting is 6 rings. You can select an answer delay of 2, 4, 6, 8 rings or Time Saver.
Time Saver can save you the cost of a call when you want to ring in to find out if you have new
messages. Your answering machine answers after 2 rings if you have new messages. If you have no
new messages, it will answer after 6 rings which gives you the opportunity to hang up and save the
cost of a call.

Set answer delay

1. Press 8PY` scroll to Ans. Machine menu and press 8PY`
2. Scroll .LWW^ or to Ans. Settings and press 8PY`
3. **Listen** will be displayed and you will be prompted to enter to hear the menu options
4. Press to change the answer delay. The new setting will be announced after each press.
5. Press and hold 8`_P to return to standby.

Playing messages

During playback, you can repeat, delete and skip back to previous messages or forward to the next
message.
1. Press 8PY` scroll to Ans. machine menu and press 8PY` .
2. Play message is displayed, press 8PY` . Your messages are played and details of each message
are displayed.
Using the answering machine (7300a only)

Reinstate pre-recorded outgoing message

This will delete your own recorded outgoing message.
To reinstate the answer only message you must fi rst set up your answering machine to Answer Only, see below. Similarly, to
reinstate the Answer & Record message the answering machine must be set to Answer & Record
1. Press 8PY` scroll to Ans. Machine menu and press 8PY`
2. Scroll .LWW^ or to Ans. Settings and press 8PY`
3. **Listen** will be displayed and you will be prompted to enter to hear the menu options
4. Press BCDE
$ and then immediately after the tone. The original pre-recorded message will be
played back to you.
5. Press 8`_P to return to standby.

Set answer mode

Set your machine to Answer & Record or Answer Only.
1. Press 8PY` scroll to Ans. Machine menu and press 8PY`
2. Scroll .LWW^ or to Ans. Settings and press 8PY`
3. **Listen** will be displayed and you will be prompted to enter to hear the menu options
4. Each press of ";<=> will alternate between Answer & Record on and Answer Only on.
5. Press 8`_P to return to standby.
Using the answering machine (7300a only)