Telular SX5T CDMA2000, SX5T-505C, SX5T-535C, SX5T-500C Using the SX5T, Making Calls, Ending Calls

Using the SX5T

Once you have installed and activated your SX5T, you’ll be ready to make and receive calls, set up voicemail, and send and receive faxes. This section explains how to use the features of the SX5T for all your communications.

Making Calls

To make a call:

1.Pick up the telephone handset. (The phone is now “off-hook.”)

2.Listen for a dial tone. (If you hear a No Service tone [fast beeping], hang up and try again. If the No Service tone continues, contact your service provider to verify that cellular service is available.)

3.Dial a phone number. (When you have finished dialing, the call will be sent automatically.)

Tip:

Pressing the Flash key or pressing and releasing the switch-hook after dialing a number will send the call immediately.

Receiving Calls

• When the telephone rings, pick up the handset and begin talking.

Ending Calls

•When you are finished with a call, hang up the phone by placing the handset back on the telephone cradle or by pressing the Off or End button.

Using In-Call Features

To place a call on hold:

•During a call, press the Flash key on your handset (if your phone doesn’t have a Flash key, press and release the switch-hook).

·If you hang up your phone when a call is on hold, the call will be disconnected.

To retrieve a call on hold:

• Press the Flash key on your phone (or press and release the switch-hook).

To answer a call waiting call:

•When you’re on an active call and a new incoming call arrives, you will hear a short tone on your phone. To place the current call on hold and answer the incoming call, press the Flash key on your phone (or press and release the switch-hook). (To switch between calls, simply repeat the process.)

To answer a call when you are dialing or with the phone off the hook:

•If a call comes in while you are dialing or when you have the phone off the hook, you will hear a call waiting tone on your phone. To answer the incoming call, press the Flash key on your phone (or press and release the switch-hook).

Note:

Call Hold and Call Waiting are not available with all service providers. These services may not be available if you are using your SX5T in a roaming area. To determine these services’ availability in your area, contact your service provider.

Phonecell® SX5T CDMA2000 10 User Manual