Setting up naviPlay
To set up and use your naviPlay Stereo Headset, you first need to charge the Adapter and the Headset for at least one hour.
Step 1: Charge the naviPlay Adapter and Headset
Using the iPod Dock Connector to USB or Firewire cable (included with iPod), connect the naviPlay Adapter to your computer or iPod Power Adapter (optional) to charge. Use the included USB Charging cable to charge the naviPlay Headset by connecting to your computer or USB power adapter (optional). You can also charge the iPod at the same time by docking your iPod in the naviPlay Adapter, however, note that charging time may increase significantly depending on the iPod battery level. See "Step 2: Attach iPod to naviPlay Adapter.
naviPlay Adapter
iPod USB Cable or FireWire (included w/iPod)
naviPlay Headset
USB Charging
Cable
Computer
Note: Firewire charging will be significantly faster than USB charging. Charging the naviPlay Adapter alone will be faster than with iPod docked in the Adapter.
Without iPod docked, the internal battery of the naviPlay Adapter will be about 80 percent charged after 2 hours, and fully charged after about 4 hours. The naviPlay Headset internal battery will be about 80 percent charged after 2 hours, and fully charged after about 4 hours. While charging, the charge light will remain constant red. When the Headset is fully charged, its light will turn green. When the iPod Adapter is fully charged, its light will turn off.
The status light will blink red when the naviPlay iPod Adapter or Headset needs to be recharged.