Troubleshooting
The naviPlay Headset does not power on or respond to button presses.
Make sure the battery is charged.
No audio is heard from the naviPlay Headset.
Make sure your iPod, naviPlay Adapter and Headset are all on and connected. Check the status light on the naviPlay Adapter and Headset. Verify that the naviPlay Adapter and Headset are within range of each other. Check the volume on the naviPlay Headset. Verify the iPod is outputting audio through the iPod headphone jack.
Audio suddenly stops.
The Headset may be out of range from the adapter. The audio streaming should resume if you move back into range within three minutes.
Can not pair with mobile phone.
Please visit http://www.tentechnology.com/naviPlay/ for list of tested compatible Bluetooth- enabled mobile phones. Note that actual performance and features available vary between phone models.
24Troubleshooting
