STEP 1:
Setting Up the Transmitter
Where to Use: Set up the Transmitter in the room where
you wish to use your remote control (example: use in the additional room wired to receive a satellite signal from your primary receiver).
How to Install:
1.Plug the Transmitter into a standard electrical outlet.
2. Place the Transmitter on a level, stable surface, with the IR logo facing you. In most cases, the unit can be placed up to 18 feet from where you will be using the remote control.
3. Place the Transmitter away from the AUDIO/VIDEO equipment and the Receiver (in another room, for example).
STEP 2:
Setting Up the Receiver
Where to Use: Use in the room where the AUDIO/VIDEO equipment’s infrared sensor is located.
How to Install:
1.Plug the Receiver power cord into a standard electrical outlet.
2.Point the IR logo on the Receiver toward the AUDIO/VIDEO infrared remote sensor on the audio/video component.
3.Check to ensure that the Receiver is located within 20 feet of the AUDIO/VIDEO equipment.
After setting up your Transmitter and Receiver, operate the Signal Sender by aiming your remote at the IR logo on the front of the Transmitter.
Maximum 18'
|
|
|
|
| 0' |
|
|
|
| m | 10 |
|
|
| u |
| |
|
| im |
|
| |
| x |
|
|
| |
| a |
|
|
|
|
| M |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum 20'
5
6
