T0437-TV38 Revise-OM.qxp 11/11/03 04:35 AM Page 11

Types of Support Structures and Mounting

Chimney Mount - Mounts on a chimney only

Types of Support Structures and Mounting (continued)

Universal Mount - For attic installations

TV38

Fig. 12

TV38

Suggested height limitation: 10 feet above chimney top.

The chimney is often an easy and convenient mounting place, but the chimney must be strong enough to support the antenna in high winds. Do not use a chimney that has loose bricks or mortar. A good chimney mount consists of a 5 or 10 foot 1-1/4” diameter steel mast and two heavy duty strap clamp-type brackets.

1.Insert the threaded end of the strap hook, (the one secured to the strap) through the end portion of the “Z” mount (hole A). Take one of the loose strap hooks and insert into hole B.

NOTE: It is important to thread the nut only 1/4” onto the hook, so that it may later be tightened to take out the slack and make the strap secure to the chimney.

2.Go around the chimney with the strap; slip the strap clip onto the strap, and then secure the other end of the strap by inserting the strap into the strap hook that is in hole B. The strap clip is used as follows: (See figure 12.)

a.Slide the strap through the loop section of the clip and bend it around through the upright section of clip.

b.Bend the upright sections of the clip down with pliers, pinching the strap firmly.

3.At this time, remove any slack in the strap by tightening the nuts at holes A and B.

4.Repeat the above steps to secure the lower mount to chimney. (It is recommended that the mounts be a minimum of 18” apart.)

NOTE: Install the upper bracket just below the top course of bricks, and the lower bracket two or three feet below the upper

11 bracket. For maximum strength, space the brackets as far apart as possible.

5.Place the mast against the mount and secure it in place using the mast support clamps and nuts.

Attic

An attic installation is the easiest, fastest and most convenient type of antenna installation, especially if you do not have easy or secure access to an outdoor area. Attic installations work best in areas where strong signals are present. Roofing materials, aluminum foil on insulation, aluminum or steel siding, metal gutters at the attic level, and metal lath under old plaster walls all can interfere with reception. Use the universal mount to secure the mast and antenna to a rafter.

1.Screw the universal mount into a supported rafter or beam.

2.Using the U-bolt, bracket and nuts, secure the mast to the universal mount.

3.After you align the mast perpendicular to the floor, tighten the nuts securely.

12

Page 6 Page 8
Page 7
Image 7
TERK Technologies TV38 HDTV owner manual Types of Support Structures and Mounting, Chimney Mount Mounts on a chimney only
Page 6 Page 8

TV38 HDTV specifications

TERK Technologies has made a significant mark in the realm of over-the-air television reception with its innovative TV38 HDTV antenna. This cutting-edge device is designed to deliver high-quality HDTV signals, making it a preferred choice for cord-cutters and those seeking a reliable antenna solution for their viewing needs.

One of the standout features of the TV38 is its sleek, modern design that allows it to blend seamlessly into any home environment. The antenna can be easily mounted on a wall, placed on a shelf, or even set up outdoors for optimal reception. This versatility ensures that users can find the perfect spot for it, whether in an urban high-rise or a suburban home.

The TV38 employs advanced technology, including an integrated amplifier, which enhances signal reception and provides a clearer picture quality, even in areas with weak signals. This built-in amplification feature distinguishes the TV38 from many traditional antennas, which often struggle to pick up distant channels. Additionally, the antenna is designed to receive both UHF and VHF signals, allowing users to access a wide array of channels, including local broadcasts, national networks, and digital stations.

Another characteristic of the TERK TV38 is its robust range. The antenna is capable of receiving signals from distances of up to 50 miles, making it suitable for a variety of locations. This extended range is particularly beneficial for users living in rural areas or regions with challenging terrain.

Installation of the TV38 is straightforward, with no special tools required. Most users can have it up and running in less than 30 minutes. The antenna comes with an easy-to-follow instruction manual, ensuring that even those who are not tech-savvy can enjoy hassle-free setup. The included coaxial cable provides ample length, giving users flexibility in positioning the antenna for optimal performance.

In summary, the TERK Technologies TV38 HDTV antenna is an excellent choice for anyone seeking to enhance their television experience without the burden of cable subscriptions. With its stylish design, advanced amplification technology, and impressive range, the TV38 stands out in the crowded market of TV antennas. It offers both functionality and efficiency, making it a must-have for modern viewers aiming to access free broadcast television with ease and clarity.
Top Page Image Contents