T0437-TV38 Revise-OM.qxp 11/11/03 04:35 AM Page 13

Types of Support Structures and Mounting (continued)

Example of Antenna Grounding

TV38

Wall Mount

 

Suggested height limitation: 10 feet above the rooftop.

TV38

NOTE: Grounding the antenna and mast provides lightning protection for the antenna and your TV set.

All outdoor antenna installations should be properly grounded. To effectively protect the installation, the coaxial cable(s) should be grounded before they enter the house. The grounding of the coaxial cable is made using a “ground block” and copper wire (not supplied). For information and the materials needed to ground your antenna installation, visit your local electronics store.

If you are not sure how to install the grounding block and rod, please consult your local retailer or TERK’S Technical Support Department at 1-800-942-8375.

An outside wall of your home is also an easy and convenient mounting place, but the wall and fasteners that you use must be strong enough to support the antenna in high winds. Ensure that the brackets are securely fastened to a solid part of your wall.

1.Space the mounting brackets on an exterior wall – be sure to clear roof eaves or any other obstacles.

2.Secure the brackets to the wall using the 4 lag screws.

3.Insert the mast between the saddles and secure with the nuts and bolts.

Tripod Mount (not included) - Used on peaked and flat roofs Suggested height limitation: 10 feet above the rooftop. Installation involving a tripod mount and a mast should be guyed if the mast is ten feet or more. The tripod mount must be securely anchored to the roof as should the guy wires. Apply roofing compound around the base of the brackets, screws and eyebolts to

Ground

Clamp

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

Grounding Wire Conductors

(NEC Section 810-21)

Electric

Service

Equipment

Power Service Grounding

 

 

 

 

Electrode System

 

Ground

(NEC Art 250, Part H)

 

Clamps

NEC - National Electrical Code

Antenna Lead

in Wire

Antenna

Discharge Unit

(NEC Section 810-20)

Rain Drip Loop On

Lead-in To TV

weather proof the holes in the roof. Try to lag bolt the legs to the roof rafters. If not, install wood plates in the attic and install bolts to secure the mount.

Telescopic Mast (not included)

The minimum safe diameter of the mast is 1-1/4 inches for this type of mount. Guy wires should be equally spaced in at least three directions. Use at least three guy wires for each ten foot section of mast. Make sure guy wires are spaced evenly apart.

13

1.Mount the 75 ohm grounding block or discharge unit as close as possible to where the downlead enters the house.

2.The ground wires for both the mast and the downlead should be copper or aluminum wire, number eight (8) or larger.

3.The downlead wire from the antenna to the antenna grounding block or discharge unit and the mast ground wire should be secured to the house with stand-off insulators, spaced from four (4) to six (6) feet apart.

NOTE: In the case of a “ground up” antenna installation, it may not be necessary to ground the mast if the mast extends four or more feet into the ground. Consult a TV serviceman for the proper depth in your location.

14

Page 7
Page 8
Image 8
TERK Technologies TV38 HDTV Suggested height limitation 10 feet above the rooftop, Telescopic Mast not included
Page 7

TV38 HDTV specifications

TERK Technologies has made a significant mark in the realm of over-the-air television reception with its innovative TV38 HDTV antenna. This cutting-edge device is designed to deliver high-quality HDTV signals, making it a preferred choice for cord-cutters and those seeking a reliable antenna solution for their viewing needs.

One of the standout features of the TV38 is its sleek, modern design that allows it to blend seamlessly into any home environment. The antenna can be easily mounted on a wall, placed on a shelf, or even set up outdoors for optimal reception. This versatility ensures that users can find the perfect spot for it, whether in an urban high-rise or a suburban home.

The TV38 employs advanced technology, including an integrated amplifier, which enhances signal reception and provides a clearer picture quality, even in areas with weak signals. This built-in amplification feature distinguishes the TV38 from many traditional antennas, which often struggle to pick up distant channels. Additionally, the antenna is designed to receive both UHF and VHF signals, allowing users to access a wide array of channels, including local broadcasts, national networks, and digital stations.

Another characteristic of the TERK TV38 is its robust range. The antenna is capable of receiving signals from distances of up to 50 miles, making it suitable for a variety of locations. This extended range is particularly beneficial for users living in rural areas or regions with challenging terrain.

Installation of the TV38 is straightforward, with no special tools required. Most users can have it up and running in less than 30 minutes. The antenna comes with an easy-to-follow instruction manual, ensuring that even those who are not tech-savvy can enjoy hassle-free setup. The included coaxial cable provides ample length, giving users flexibility in positioning the antenna for optimal performance.

In summary, the TERK Technologies TV38 HDTV antenna is an excellent choice for anyone seeking to enhance their television experience without the burden of cable subscriptions. With its stylish design, advanced amplification technology, and impressive range, the TV38 stands out in the crowded market of TV antennas. It offers both functionality and efficiency, making it a must-have for modern viewers aiming to access free broadcast television with ease and clarity.
Top Page Image Contents