TERK Technologies TV44 manual Using a Multiswitch with an Antenna Input

D- Using a Multiswitch with an Antenna Input

1.Complete “Scenario A” instructions. (Page 5)

2.Locate your multiswitch and disconnect the satellite wire from

the 18 volt or Satellite A/101 18 volt terminal.

3.Connect the satellite wire to the TV/SAT terminal of the diplexer. See Fig 16.

Fig 16.

Diplexer Logo Side

Dish Side

4.Use one of the supplied white 12” antenna cables to connect the “TV terminal” of the diplexer to the ANTENNA INPUT on the multiswitch. See Fig 16.

5.Use the other supplied white 12” antenna cable to connect the

10	“SAT terminal” of the diplexer to the 18 volt (or Satellite “B”
	Terminal) of the multiswitch. See Fig 16.

6. Continue to “Installing the Indoor Diplexers.”