With Dish 500 Using SW21 Switches | TERK Technologies TV44 specification

Connecting the TV44 (continued)

E - With Dish 500 Using SW21 Switches

1.Locate your SW21 multiswitches and disconnect the satellite leads connected to the “TO RECIEVER” terminals. See Fig 17.

2. Connect the satellite leads to the OUT 1 and OUT 2 terminals on the TV44. See Fig 17.

NOTE: You may need to extend the satellite leads using a barrel connector and extra RG6 coaxial cable if they are not long enough.

3.Using 2 black 32” antenna cables connect the “TO RECIEVER” terminals on the SW21 multiswitches to the IN 1 and IN 2 terminals on the TV44 antenna. See Fig 18.

Logo Side

Fig 17.

Dish Side

Fig 18.

Logo Side

Dish Side

Diplexer

11	NOTE: You may need to purchase longer antenna cables separately
	if the supplied black 32” antenna cables are not long enough.

TERK Technologies TV44 manual With Dish 500 Using SW21 Switches

Models: TV44

Connecting the TV44 (continued)

E - With Dish 500 Using SW21 Switches

if the supplied black 32” antenna cables are not long enough.

4. Continue to “Installing the Indoor Diplexers.”