•The tone feature only applies when the dial mode is set to pulse.
•This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 26).
Redial
The redial/pause key redials the last number dialed. The redialed number can be up to 32 digits long.
Tone Dialing Switch Over
Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can switch | redial | select delete memory |
|
| |
over to tone dialing during the call. This feature is useful | pause | channel |
|
|
when you need tone dialing to use automated systems, for
example, entering your bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press 
/tone/ 
. Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 1 minute.
[ 20 ] B A S I C S | www.uniden.com |
