www.ti.com

3.4 INTERNAL TEMPERATURE SENSOR CHARACTERISTICS

3.5 HIGH FREQUENCY OSCILLATOR

3.6 LOW FREQUENCY OSCILLATOR

3.7 INTEGRATING ADC (COULOMB COUNTER) CHARACTERISTICS

3.8 ADC (TEMPERATURE AND CELL MEASUREMENT) CHARACTERISTICS

bq27500bq27501System-Side Impedance Track™ Fuel Gauge
SLUS785 – SEPTEMBER 2007
T
A
= –40 °C to 85 °C, 2.4 V < V
CC
< 2.6 V; Typical Values at T
A
= 25 °C and V
CC
= 2.5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
G
TEMP
Temperature sensor voltage gain –2.0 mV/ °C
T
A
= –40 °C to 85 °C, 2.4 V < V
CC
< 2.6 V; Typical Values at T
A
= 25 °C and V
CC
= 2.5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
f
OSC
Operating frequency 2.097 MHz
T
A
= 0 °C to 60 °C –2.0% 0.38% 2.0%
f
EIO
Frequency error
(1) (2)
T
A
= –20 °C to 70 °C –3.0% 0.38% 3.0%
T
A
= –40 °C to 85 °C –4.5% 0.38% 4.5%
t
SXO
Start-up time
(3)
2.5 5 ms
(1) The frequency error is measured from 2.097 MHz.(2) The frequency drift is included and measured from the trimmed frequency at V
CC
= 2.5V, T
A
= 25 °C.(3) The startup time is defined as the time it takes for the oscillator output frequency to be ±3%.
T
A
= –40 °C to 85 °C, 2.4 V < V
CC
< 2.6 V; Typical Values at T
A
= 25 °C and V
CC
= 2.5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
f
LOSC
Operating frequency 32.768 kHz
T
A
= 0 °C to 60 °C –1.5% 0.25% 1.5%
f
LEIO
Frequency error
(1) (2)
T
A
= –20 °C to 70 °C –2.5% 0.25% 2.5%
T
A
= –40 °C to 85 °C –4.0% 0.25% 4.0%
t
LSXO
Start-up time
(3)
500 μs
(1) The frequency drift is included and measured from the trimmed frequency at V
CC
= 2.5V, T
A
= 25 °C.(2) The frequency error is measured from 32.768 kHz.(3) The startup time is defined as the time it takes for the oscillator output frequency to be ±3%.
T
A
= –40 °C to 85 °C, 2.4 V < V
CC
< 2.6 V; Typical Values at T
A
= 25 °C and V
CC
= 2.5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
SR_IN
Input voltage range, V
(SRN)
and V
(SRP)
V
SR
= V
(SRN)
– V
(SRP)
–0.125 0.125 V
t
SR_CONV
Conversion time Single conversion 1 s
Resolution 14 15 bits
Before calibration 1 mVV
SR_OS
Input offset
After calibration 10 μV
INL Integral nonlinearity error ±0.007 ±0.034 % FSR
Z
SR_IN
Effective input resistance
(1)
2.5 M Ω
I
SR_LKG
Input leakage current
(1)
0.3 μA
(1) Specified by design. Not tested in production.
T
A
= –40 °C to 85 °C, 2.4 V < V
CC
< 2.6 V; Typical Values at T
A
= 25 °C and V
CC
= 2.5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
ADC_IN
Input voltage range –0.2 1 V
Submit Documentation Feedback ELECTRICAL SPECIFICATIONS 5