Texas Instruments Connecting CC2511 Dongle to SmartRF04EB for Programming and Debugging

Models: CC2511

1 24
Download 24 pages 31.84 Kb
Page 4
Image 4

CC2511 Dongle

4 Connecting CC2511 Dongle to SmartRF04EB.

Please see the “CC2430DK_CC2510_CC1110_User_Manual” for more information on the SmartRF04EB and how to use the CC2510EM.

Make sure to install SmartRF® Studio before connecting the SmartRF04EB to a PC. SmartRF® Studio can be downloaded from the www.chipcon.com or www.ti.com/lpw

The CC2511 have a 2 wire debug interface that is used for chip programming and debugging. When connecting this interface to the SmartRF04EB USB MCU, the CC2511 can be programmed from the Chipcon Flash Programmer software and debugged from IAR embedded workbench..To connect the CC2511 Dongle to the SmartRF04EB follow these 6 steps:

1.Turn off the SmartRF04EB power by moving the power switch to the left position. See Figure 3.

2.Remove any CCxxxxEM modules attached to the SmarRF04EB.

3.Connect the SmartRF04EB to a PC with the supplied USB cable.

4.Connect the CC2511 Dongle to the SmartRF04EB with the supplied 10 pin cable.

The cable should be mounted between the “SoC debug” connector on the CC2511 Dongle and the “P14 SoC debug / flash” connector on the SmartRF04EB. Make sure pin 1 is connected to pin 1. This cable connects the debug interface and GND between the two devices, however the CC2511 Dongle is not powered trough this cable.

5. Power the CC2511 Dongle.

To power the CC2511 Dongle there are two options:

Powered with a USB cable.

Using the supplied USB extension cable to connect the CC2511 Dongle to the PC.

See Figure 1.

Powered from the SmartRF04EB.

Connect pin 9 on the “Test pin” connector on CC2511 Dongle to pin 5 on the “I/O A” connector on SmartRF04EB to power the Dongle from the SmartRF04EB. See Figure 2.

The CC2511 Dongle should only be powered by one of the two sources at a time.

Do not connect the USB cable to the CC2511 Dongle while it is powered from the SmartRF04EB.

The SmartRF04EB have a level converter on the debug connector, so the SmartRF04EB and the CC2511 Dongle may have a different power supply voltage.

SWRU082

Page 4 of 24

Page 4
Image 4
Texas Instruments Connecting CC2511 Dongle to SmartRF04EB, Powered with a USB cable, Powered from the SmartRF04EB

CC2511 specifications

Texas Instruments CC2511 is a highly versatile and efficient System-on-Chip (SoC) designed for wireless communication applications in the 2.4 GHz ISM band. This device is particularly suitable for low-power, low-rate wireless connections, making it ideal for applications such as home automation, industrial control, and medical device communications.

One of the key features of the CC2511 is its integrated low-power, high-performance radio transceiver, which enables robust wireless communication. The device supports a wide range of modulation schemes, including 2-FSK and GFSK, allowing for flexible communication options tailored to specific application requirements. With a maximum output power of +5 dBm, the CC2511 ensures reliable transmission over significant distances while maintaining energy efficiency.

The CC2511 also incorporates a powerful 8051 microcontroller. This 8-bit microcontroller operates at speeds up to 24 MHz and is equipped with 128 bytes of RAM and 4 KB of Flash memory. The integration of the microcontroller allows developers to run application code directly on the chip, simplifying the design and reducing the need for additional components.

Additionally, the CC2511 features multiple connectivity options, including a hardware accelerator for AES-128 encryption. This ensures secure data transmission, which is crucial for applications that require privacy and protection against unauthorized access. The built-in power management features allow for energy-efficient operation, with various sleep modes that help extend battery life for portable devices.

Moreover, the CC2511 supports the SimpleLink technology from Texas Instruments, which offers a seamless development environment and user-friendly tools. Developers can take advantage of software development kits (SDKs), sample applications, and extensive documentation to streamline the development process.

In terms of characteristics, the CC2511 operates across a wide range of temperatures, making it suitable for various environmental conditions. Its compact size and low power consumption make it an excellent choice for battery-operated devices.

In conclusion, Texas Instruments CC2511 stands out as a leading solution for low-power wireless applications with its integrated transceiver, microcontroller, and advanced features. This SoC empowers developers to create innovative and efficient communication solutions across various industries.