Texas Instruments SLOU082 manual Quick Start List for Platform, Platform Preparations

Models: SLOU082

1 28
Download 28 pages 36.55 Kb
Page 13
Image 13

Quick Start List for Platform

2.2 Quick Start List for Platform

Follow these steps when using the TPA032D03 class-D EVM with the TI plug-n-play audio amplifier evaluation platform (see the platform user's guide, SLOU011, for additional details). Numbered callouts for selected steps are shown in Figure 2±1 and details appear in Chapter 3.

-Platform Preparations

1)Ensure that all external power sources and platform power switch S1 are set to OFF.

2)Install a TPA032D03 module in platform socket U2, taking care to align the module pins correctly (EVM power pins engage sockets U2 and U3).

3)Set switch S2 to OFF.

4)Set switch S3 to U5.

5)Set jumper JP6 to select the Mute control input.

6)Set control signal Polarity jumper JP8 to Lo.

Table 2±2. Platform Jumper and Switch Settings for the TPA032D03

POWER TYPE (Note 2)

JP1

JP4

JP5

JP6

JP7

JP8

S1

S2 (Note3)

S3

 

 

 

 

 

 

 

 

 

 

VCC (J1)

ON

ON

ON

Mute

X

Lo

ON

OFF

U5

Notes: 1) ON = Jumper installed, OFF = Jumper NOT Installed, X = Don't care

2)Install a voltage regulator EVM (SLVP097) in platform socket U6 for VDD power to EVM control inputs.

3)Set to ON Tone Control Board SLOP109 is installed in U1.

-Power supply

7)Connect a 12-Vregulated power supply (ensure power supply is set to OFF ) to J1, taking care to observe marked polarity.

8)Set jumper JP1 for dc source to be from input J1.

9)Set jumper JP4 for VCC power to EVMs.

10)Install a voltage regulator EVM (SLVP097) in platform socket U6.

11)Set jumper JP5 for VDD power to EVMs.

-Inputs and outputs

12)Ensure that the audio signal source level is set to minimum.

13)Connect the audio source to left and right RCA phono jacks J3 and J5 or mono miniature phone jack J4.

14)Connect 4-Ω± 8-Ωspeakers to left RCA jack J9 or to stripped wire speaker connectors J8.

-Power up

15)Verify correct voltage and input polarity and set the external power supply and platform power switch S1 to ON.

Platform LED1 and LED2 should light indicating the presence of VCC and VDD, and the evaluation module(s) installed on the platform should begin operation.

16)Set switch S2 to ON if tone control board SLOP109 is installed in U1.

17)Adjust the signal source level as needed.

Quick Start

2-3

Page 13
Image 13
Texas Instruments SLOU082 manual Quick Start List for Platform, Platform Preparations

SLOU082 specifications

Texas Instruments SLOU082 is a technical document primarily focused on the TPS7A47 device, which is an enhanced, low-noise linear voltage regulator designed for world-class performance in sensitive analog applications. This document explains the features, technologies, and characteristics that set the TPS7A47 apart in the industry.

One of the main features of the TPS7A47 is its ultra-low output noise, boasting a remarkable specification of just 1.2 μVRMS across a bandwidth of 10 Hz to 100 kHz. This characteristic makes it an ideal choice for high-precision, low-noise applications such as RF and audio signal processing, where minimizing noise is crucial for system performance. Additionally, the device offers a wide output voltage range from 1.4 V to 20 V, providing flexibility in various applications.

The TPS7A47 operates with a maximum output current of 1 A, enabling it to support multiple loads efficiently. Its dropout voltage is impressively low, particularly at light load conditions, ensuring high-efficiency performance in battery-powered applications. This aspect significantly extends battery life, making it suitable for portable devices.

Another highlight is the PowerPAD package offered for the TPS7A47, which enhances thermal performance and simplifies PCB design. The integration of thermal protection ensures the regulator operates safely under various conditions, preventing potential damage due to overheating.

The TPS7A47 also includes features such as reverse current protection, which prevents current from flowing back into the input when the output voltage exceeds the input voltage. This feature enhances reliability and extends the longevity of the device in various circuit configurations.

In terms of control, the TPS7A47 utilizes a low-dropout architecture, ensuring steady voltage regulation with minimal input-to-output voltage differential. It also supports a wide range of capacitor types, which allows for flexibility in component selection in layout design.

Overall, the Texas Instruments SLOU082 document on the TPS7A47 provides detailed insights into one of the most effective voltage regulation solutions available today. With exceptional noise performance, a versatile voltage range, robust thermal management, and reliability characteristics, the TPS7A47 is an exemplary choice for engineers and designers aiming to achieve high-performance analog systems.