EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-,marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein.

Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling the product. This notice contains important safety information about temperatures and voltages. For additional information on TI’s environmental and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or combination in which such TI products or services might be or are used.

FCC Warning

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be required to correct this interference.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Copyright © 2008, Texas Instruments Incorporated

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of 0 V to 30 V and the output voltage range of 0 V to 5 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than 85°C. The EVM is designed to operate properly with certain components above 85°C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Copyright © 2008, Texas Instruments Incorporated

Page 2 Page 4
Page 3
Image 3
Texas Instruments SLAU245, SN65HVS880 manual Evaluation BOARD/KIT Important Notice, EVM Warnings and Restrictions
Page 2 Page 4

SLAU245, SN65HVS880 specifications

The Texas Instruments SN65HVS880 is a high-performance, low-power transceiver designed specifically for high-speed communication in industrial applications. This device is part of the TI family of robust solutions, ensuring reliability and efficiency in various demanding environments. One of the significant advantages of the SN65HVS880 is its ability to operate in harsh electrical conditions, making it an ideal choice for industrial systems and automation.

One of the standout features of the SN65HVS880 is its wide input voltage range, allowing it to work seamlessly with various supply voltages, typically from 3.3V to 5V. This flexibility is crucial for designers looking to integrate the device into existing systems with different voltage specifications. The integrated level-shifting capabilities ensure compatibility with both 3.3V and 5V logic, easing system integration and reducing the need for additional components.

The device utilizes differential signaling technology, which significantly enhances noise immunity and minimizes signal degradation over long distances. This feature is particularly beneficial in environments with high electromagnetic interference, where maintaining signal integrity is of utmost importance. The transceiver supports data rates of up to 100 Mbps, allowing for fast and efficient data transmission essential for industrial communication applications.

Another notable characteristic of the SN65HVS880 is its low power consumption. The device is designed to operate efficiently, reducing thermal output and extending battery life in portable applications. This aspect is especially critical in battery-powered devices, where energy efficiency directly affects operational longevity.

Additionally, the SN65HVS880 features built-in fault protection mechanisms, such as thermal shutdown and short-circuit protection. These safety features enhance the device's reliability and longevity in rugged environments, ensuring that systems remain operational even under adverse conditions.

The SLAU245 document provides a comprehensive overview of the SN65HVS880's specifications, application scenarios, and design considerations. It serves as a valuable resource for engineers and designers looking to incorporate this transceiver into their projects. By leveraging advanced technologies such as enhanced noise immunity, low power consumption, and robust protection features, the SN65HVS880 stands out as a versatile and reliable component in the realm of industrial communication systems.

Overall, the Texas Instruments SN65HVS880 is a compelling choice for engineers seeking a high-performing transceiver that can withstand the rigors of industrial applications, fulfilling both performance and reliability requirements.
Top Page Image Contents