Texas Instruments TAS5110D6REF manual Pin No Net Name Description

		PWM Interface (J100)
Table 2–4. J100 Pin Description (Continued)
Pin No.	Net Name	Description
28	PWM–AM–5	Channel 5 PWM input (differential –) – positive H-bridge side
29		Valid channel 5
	VALID–5
30	PWM–BM–5	Channel 5 PWM input (differential –) – negative H-bridge side
31	PWM–BP–5	Channel 5 PWM input (differential +) – negative H-bridge side
32	GND	Ground
33	PWM–AP–6	Channel 6 PWM input (differential +) – positive H-bridge side
34	PWM–AM–6	Channel 6 PWM input (differential –) – positive H-bridge side
35		Valid channel 6
	VALID–6
36	PWM–BM–6	Channel 6 PWM input (differential –) – negative H-bridge side
37	PWM–BP–6	Channel 6 PWM input (differential +) – negative H-bridge side
38		Shutdown group 1 (center + left and right front speakers)
	SD–E1
39		Shutdown group 2 (subwoofer + left and right rear speakers)
	SD–E2
40		Error signal ERR0 from TAS5110
	ERROR0
41		Error signal ERR1 from TAS5110
	ERROR1
42		System reset (bidirectional)
	RESET
43	PSU–COMP–2	For future use
44	PSU–COMP–1	For future use
45	Not Used	For future use
46	Not Used	For future use
47	+3.3V	3.3-V supply voltage for the modulator module (e.g., the TAS5026REF)
48	GND	Ground
49	+5V	5-V supply voltage
50	+5V	5-V supply voltage

System Interfaces 2-5